December 2016

www.mandsmetalcraft.co.uk

Welcome to the last Blog of 2016-what a fun packed busy year we have had,so many different projects completed and more to come in the New Year.

Below we have some festive images to start the season off and then some completed projects and other assorted manufacturing pics!

 Saint Nick before Coca-Cola re-branded him.

 

A metal Christmas tree!

A metal tree manufactured for our Professional Florist Customer ready to decorate and create the same effect as the picture above.

The finished and fitted balconies that featured in the November Blog. 

New grilles for our catering customer.

Door plate.Finished silver

Completed and fitted Handrail and Railing for our Customer in Selsdon.

A wintery scene as Winter has officially started...

Thank You to all our Customers in 2016,we would not be here without you.

To all of our Blog readers-Wishing you all a Happy Christmas and New Year.

Until 2017.................................................  

November 2016

www.mandsmetalcraft.co.uk

Dear Readers
A bit behind with the November Blog as already half way through December-have been really busy with lots of different projects and the usual pricing,but here it is at last:

Completed metal Railings and handrail to front garden.

A completed 8ft diameter wreath ring.

Manufacturing Balconies

Rod infill ready for welding.

Ready for the galvanizers to collect.

Back from Galvanizing-Large Balcony.

Back from galvanizers and awaiting 

cleaning up.-small balcony

Powder Coated and wrapped ready for site fixing.

An occasional table stand during manufacture.

Fencing strengthening bars.

Mild Steel book shelves-finished black matt paint.

Until the December Blogspot-keep warm!.........

October 2016

Dear Readers.Welcome to the October Blogspot-time is flying by and this weekend the clocks went back one hour-where has that year gone to?Below we have the bare metal to finished projects-lots of variation this Month.

Below is the manufacture of tie rods.

Using a die to thread rod ends.M16

Bracket for rods.

 Tie Rods finished- black matt paint

Handrail undercoated and ready for top coating gloss.

Finished handrails awaiting wrapping ready for site

Metal Handrails to front steps

Metal Handrails to side entrance

Metal Handrail fixed to wall

Metal Handrail fixed to wall and floor

New gates to school alleyway

 Drawing out of metal tree trunk shape

 Metal tree shape manufactured

Metal circle centre brace

Circle awaiting welding

 Completed circles with middle cross braces.

Completed stands with tree trunk shape bases. 

Autumn colour

Hanging Baskets for Autumn.

Until November..................

September 2016

Welcome to the September Blogspot,this month covers from bare metal to finished product of some special metal supports-see the video below for the completed article.

Drawing of structure.

Metal outside awaiting cutting to length.

Angles cut and awaiting drilling.

Drilling of angles.

RHS sections cut,drilled and awaiting welding.

Moving metal around the workshop,the old fashioned way!

All angles and end pieces.

Bolts,nuts and washers counted out and boxed up.

Welding of end pieces which will bolt to the angles.

End piece welded on. 

See the video below that shows installation by our customer. 

https://youtu.be/L30k6ZW7K6c

Above are the photographs of the finished article installed by our customer at Heathrow Airport.

This month we have also found the time to replace the welding bench with all new RHS sections.Although it does not look straight in the picture it has been packed and checked to ensure it is perfectly square and level.

Until October........................